KRADG31
AZURA pH Monitor pH 2.1S
AZURA pH sensor, 100 mL/min for pH Monitor, pH 2.1S and Conductivity Monitor CM 2.1S
Knauer
Pending approval
Log in for pricing
(No reviews yet)
Write a Review
Knauer
AZURA pH sensor, 100 mL/min for pH Monitor, pH 2.1S and Conductivity Monitor CM 2.1S
The AZURA pH sensor is an optional accessory that can be connected to the pH2.1S conductivity monitor. It comes with a pH electrode with BNC connector, a pH flow cell with integrated bypass, and flat-bottom fittings to connect the pH flow cell to either 1/16" or 1/8" OD tubing.
Several options are available to physically integrate the sensor into your AZURA system to minimize system volume. Choose from the AZURA Mounting Bracket Bio, the AZURA Organizer, or the AZURA Click System (ordered separately).
Order the pH electrode dummy separately if your application requires frequent removal of the pH electrode.
The recommended maximum flow rate is 100 ml/min, however the pH sensor tolerates higher flow rates. the limiting factor is the maximum pressure of the pH electrode (5 bar). The delay volume of the flow cell with inserted electrode is approx. 80 µl.
- Sales Unit:
- EACH
Related Products
-
-
AZURA P 2.1S Compact pump without pressure sensor, with 10 ml/min stainless steel pump head
SKU : KRAPG90EALog in for pricing
Pending approvalKnauer
KRAPG90EAAZURA P 2.1S Compact pump without pressure sensor, with 10 ml/min stainless steel pump head -
GBBTNM0060pH Buffer, Blue, pH 10.0, 500 mL
-
GBBTNM0061pH Buffer, Red pH 4.0,, 500 mL
